Новый экскаватор-погрузчик XCMG XC8‑C2570

The XCMG XC8‑C2570 is a 4‑wheel‑drive integrated backhoe‑loader (TLB machine) manufactured in Xuzhou, China, with an overall operating weight of 7600 kg and a rated front‑end lifting load capacity of 2500 kg. It supports switch‑over between two‑wheel drive and four‑wheel‑drive modes to adapt to different road and working‑site conditions. The machine is equipped with a ROPS & FOPS‑certified fully‑enclosed operator cabin fitted with air‑conditioning, providing safe and comfortable operation environment.

This backhoe‑loader is powered by BF4M2012‑10T3R four‑cylinder, turbo‑charged, water‑cooled, four‑stroke direct‑injection diesel engine. The engine delivers a rated net power output of 74 kilowatts at 2200 revolutions per minute, with total displacement of 4.04 litres (4040 cc), complying with China Non‑road Stage‑III emission standard which is equivalent to EPA Tier 3 requirement.

For the power transmission system, this unit adopts XCMG MYF110 power‑shift gearbox, with 4 forward gears and 3 reverse gears. Heavy‑duty wet‑brake front and rear drive axles are installed. Its maximum travel speed reaches up to 38 km/h, maximum gradeability is 20 degrees, and the minimum turning radius measures 4400 mm, while the wheelbase is 2180 mm. Front tyre specification is 12.5/80‑18, and rear tyre size is 19.5L‑24. The maximum tractive force is no less than 70 kN.

On the front loader section, the machine is fitted with a standard 1.0 cubic‑meter general‑purpose loader bucket. Its maximum dumping height is 2776 mm, maximum dumping reach is 831 mm, and the maximum bucket‑pin height reaches 3495 mm. The maximum loader breakout force is 66 kN. The front loader boom supports automatic levelling function to improve working efficiency.

At the rear backhoe excavation end, the machine comes with a standard digging bucket of 0.3 cubic‑meter capacity. Its maximum digging depth is 4440 mm, maximum horizontal digging radius is 5426 mm, and the bucket breakout force reaches 63 kN. The backhoe boom can swing at a total angle of 180 degrees for wide excavation coverage. Operators are allowed to switch freely between ISO and SAE control patterns to meet different operation habits.

The hydraulic system works under a rated working pressure of 24 MPa, adopting dual‑pump confluence hydraulic circuit for high‑efficiency operation. Mechanical control is equipped for the back‑end working device. Hydraulic quick‑coupler connections are optional for both loader and backhoe ends, so various attachments can be installed rapidly. Optional working attachments include six‑in‑one multi‑function bucket, pallet fork, grapple, breaker hammer, auger drill, sweeper, soil ripper, vibrating compactor plate and other tools.

The overall outer dimension of the whole machine with standard front bucket is 7340 mm in length, 2350 mm in width and 3437 mm in height. The fuel tank volume is 166 litres and the hydraulic oil tank capacity is 95 litres.