Редуктор хода 114-1331 для среднего экскаватора Caterpillar 325BL

325BL Final Drive for CAT Excavator spare parts 114‑1331 191‑3246 1141331 1913246 Axial Piston Motor

Product Overview

The Caterpillar 325BL is a 25‑ton B‑series machine built to push, dig and climb — and when its final drive gives way, the whole job stops. The axial piston motor and planetary reducer under each track, covered by references 114‑1331, 191‑3246, 1141331 and 1913246, is the unit that turns hydraulic flow into the slow, powerful rotation pulling the long‑undercarriage frame across site. Hours of ramp climbs, soft‑ground pushes and breakout loads wear the drive down in quiet stages first: the two tracks stop quite matching, the machine drifts on level ground, the drive housing warms faster than its opposite, and eventually a side hesitates rather than pulls. By then the piston group and reduction gears are already scoring against each other. This aftermarket drive reproduces the original motor‑and‑reducer pairing as one sealed, tested unit, so the worn assembly comes off and the new one bolts straight back on.

Core Advantages

1. Torque output matched to a 25‑ton long‑undercarriage machine
The 325BL carries real weight and meets real resistance on slopes and broken ground. Hardened gears and piston surfaces hold the sprocket torque the tracks need to push and climb, without the laboured travel that undersized replacements produce.

2. Sealed for the dust and water of long site hours
B‑series machines work through long shifts in quarry dust, mud and standing water. Correct output‑shaft and housing sealing keeps grit out of the motor and gearbox — the protection that decides whether a final drive lasts years or months.

3. Quiet, even gear meshing that protects the reducer
Precision‑cut planetary gears with controlled backlash run smoothly — no clicking, no grinding note. Even load sharing means the gears wear slowly rather than hammering one another into early failure.

4. A complete matched assembly for fast turnaround
Supplied as one motor‑and‑gearbox unit, the final drive bolts straight into the original mounting position. No mixing separate parts, no mid‑job mismatches — essential when a stationary machine is losing money every hour.

5. Aftermarket value for a B‑series fleet
An original Caterpillar final drive exchange carries a serious price tag. This aftermarket unit delivers dependable output at a fraction of the cost, with sample and batch supply for workshops maintaining several 325BL machines.

Manufacturing & Quality Control

Each drive is assembled under controlled conditions: precision machining of gear and housing parts, heat treatment of wear surfaces and clean build. Every unit is bench‑tested for output torque, leakage and running noise before release, and only passing assemblies are packed. Anti‑rust preservation and shock‑absorbing export packing protect the unit during long‑distance transport.

Frequently Asked Questions

Q1: How do I confirm which reference suits my 325BL?
A: Check the tag on your existing final drive against the four references and share your machine serial number. Build variants can differ, so we verify before dispatch.

Q2: Is this the complete final drive assembly?
A: Yes — it is the full axial piston travel motor and planetary reducer unit, ready to bolt on as one piece. If you need the motor or gearbox separately, please ask and we will confirm availability.

Q3: What faults point to final drive wear?
A: Uneven track speed, pulling to one side on level ground, a hot or noisy track motor and tracks that fail to pull under load. Inspect before contamination spreads through the travel circuit.

Q4: What is the warranty position?
A: Manufacturing and material defects are covered. Damage from contaminated oil, foreign objects in the travel circuit, track obstruction, overload operation or incorrect installation is excluded; please follow the Caterpillar service manual for fitting and bleeding.