Линия розлива в банки Ningbo Cixi AXW20-4Q, ABB IRB 460

brand: Ningbo Cixi
New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot
Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard
Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm)
Lid size: 202 for all formats (plug Ø 52.40 mm)
Electrical supply: 380 V / 220 V, 50 Hz
Filler: compressed air and CO2 at 0.4 MPa
Pasteurizer heating: steam at 0.4 MPa, steam boiler not included
Immediately. Location: Serbia
Overview
Technical data
Scope of Delivery
Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking
Siemens PLC and touch screen
10,000 cans/h
7.8 kW
approx. 8 x 4 x 3.3 m
Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor
fits both can formats
Can rinser | CX-1 | inline spray rinser
2 sets of can cages
approx. 4,000 mm total length
Filler-seamer monoblock | AXW20-4Q | 20 filling valves
4 seaming heads
change parts for Ø 66 mm cans
7.5 kW
approx. 5,000 kg
3,050 x 2,000 x 2,000 mm
Tunnel pasteurizer | BG-PLG | 8 temperature zones
4 plate heat exchangers
25 kW
16,000 x 2,400 x 1,800 mm including heat exchangers and piping
Fill level inspection | YMXS-180G | inline
Leak inspection | inline internal pressure check
Can inverters | FGJ | 2 units
Air knife dryer | CG-1 | 24,000 cans/h
7.5 kW fan
Can conveyors | magnetic chain conveyors
approx. 97 m up to the labeller with 13 drives and control cabinet
plus 22 m of belt conveyor from the labeller to the shrink wrapper
Sleeve labeller | SLM-150 | up to 9,000 cans/h
PM-1800 steam shrink tunnel with steam generator
mandrels for both can formats
Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film
up to 25 packs/min
max. pack size 420 x 280 x 350 mm
approx. 3,000 kg
Robot palletizer | ABB | IRB 460 | 4-axis robot
110 kg wrist load
2.4 m reach
vacuum gripper for 6
12 and 24 packs in both can formats
Pallet magazine | automatic
holds 8 to 10 empty pallets
Pallet conveyors | heavy-duty roller conveyors
Pallet stretch wrapper | automatic inline turntable wrapper
2,000 mm turntable
loads up to 1,200 x 1,200 x 1,800 mm
20 to 30 pallets/h
Siemens PLC and touch screen
Condition
New and unused
packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation
Availability